S88-270

Single Shaft Open Fan and Blower Motor

• Continuous duty, air over
• Shaded pole
• 60Hz
• 1/2" diameter flatted shaft
• Resilient mounting rings included
• 3 thru bolts, 4.42 diameter bolt circle
• Extended thru bolts, shaft end only

Century Motors

BL6414

Diameter: 5";HP: 1/5-1/10;Volts: 115;F/L Amps: 6.50;Phase: Single;Hz: 60;Service Factor: 1.00;RPM: 1050;Speeds: 3;Rot.: CCWLE;Efficiency: 35%;Shaft Diam.: 1/2";Shaft Length: 4-7/8";Bearin ...

S89-770

Single Shaft Open Fan and Blower Motor

Continuous duty, air over Shaded pole 60Hz 1/2" diameter flatted shaft Resilient mounting rings included 3 thru bolts, 4.42 diameter bolt circle Extended thru bolts, shaft end only

Century Motors

BL6412

Diameter: 5";HP: 1/6;Volts: 115;F/L Amps: 5.50;Phase: Single;Hz: 60;Service Factor: 1.00;RPM: 1050;Speeds: 1;Rot.: CCWLE;Efficiency: 35%;Shaft Diam.: 1/2";Shaft Length: 3-5/8";Bearing Typ ...

S89-771

Single Shaft Open Fan and Blower Motor

Continuous duty, air over Shaded pole 60Hz 1/2" diameter flatted shaft Resilient mounting rings included 3 thru bolts, 4.42 diameter bolt circle Extended thru bolts, shaft end only

Century Motors

BL6420

Diameter: 5";HP: 1/6-1/9;Volts: 115;F/L Amps: 5.60;Phase: Single;Hz: 60;Service Factor: 1.00;RPM: 1050;Speeds: 2;Rot.: CCWLE;Efficiency: 35%;Shaft Diam.: 1/2";Shaft Length: 3-5/8";Bearing ...

S81-250

Evergreen® IM Retrofit Blower Motor

48 frame, ball bearing 80% high efficiency ECM technology RPM range: 600–1075 Whisper-quiet operation 5 pre-programmed speed-torque profiles Correct direction of rotation automatically determined by patented auto-rotation capability

Genteq

6005

Diameter: 5-5/8";HP: 1/2-1/5;Volts: 115/208-230;F/L Amps: 4.00;Phase: Single;Hz: 60;Service Factor: NULL;RPM: 1075;Speeds: 5;Rot.: Rev.;Efficiency: 80%;Shaft Diam.: 1/2";Shaft Length: 5"; ...

S81-251

Evergreen® IM Retrofit Blower Motor

48 frame, 5-speed, 1075 RPM, ball bearing, all-angle mounting 80% high efficiency ECM technology Whisper-quiet operation

Genteq

6010

Diameter: 5-5/8";HP: 1-1/2;Volts: 115/230;F/L Amps: 11.00/6.70;Phase: Single;Hz: 60/50;Service Factor: NULL;RPM: 1075;Speeds: 5;Rot.: CCW/CW;Efficiency: 80%;Shaft Diam.: 1/2";Shaft Length: ...

S87-627

Belt Drive Fan Motor Sleeve bearing motor replacements for furnace blowers, belt driven fans, air coolers and similar applications with moderate torque requirements

Continuous duty, all-angle mounting, 40°C rise Resilient base, includes shaft adapter for 5/8" shaft Easily reversible at terminal board Open dripproof design Combination mounting holes for NEMA 48 and 56 frame dimensions Not recommended where automatic reset creates a hazard

US Motors

8000

Diameter: 5-5/8";HP: 1/4;Volts: 115;F/L Amps: 5.30;Phase: 1;Hz: 60;Service Factor: 1.35;RPM: 1725;Speeds: 1;Rot.: Rev.;Efficiency: 51%;Shaft Diam.: 1/2";Shaft Length: 1-1/2";Bearing Type: ...

S87-628

Belt Drive Fan Motor

Combination mounting holes for NEMA 48 and 56 frame dimensions, complete with resilient base Not recommended where automatic reset creates a hazard

US Motors

8100

Diameter: 5-5/8";HP: 1/3;Volts: 115;F/L Amps: 6.70;Phase: 1;Hz: 60;Service Factor: 1.35;RPM: 1725;Speeds: 1;Rot.: Rev.;Efficiency: 57%;Shaft Diam.: 1/2";Shaft Length: 1-1/2";Bearing Type: ...

S87-629

Belt Drive Fan Motor Sleeve bearing motor replacements for furnace blowers, belt driven fans, air coolers and similar applications with moderate torque requirements

Continuous duty, all-angle mounting, 40°C rise, easily reversible at terminal board, open dripproof design NEMA 56 and combination 48/56 frame models, complete with resilient base Not recommended where automatic reset creates a hazard

US Motors

8200

Diameter: 5-5/8";HP: 1/2;Volts: 115;F/L Amps: 8.70;Phase: 1;Hz: 60;Service Factor: 1.25;RPM: 1725;Speeds: 1;Rot.: Rev.;Efficiency: 66%;Shaft Diam.: 1/2";Shaft Length: 1-1/2";Bearing Type: ...

S88-545

3-Speed Blower Motor 48 Frame Permanent Split Capacitor

For direct drive furnace blowers and other air over applications Four studs shaft end on 5-1/8" bolt circles Sleeve bearing for all angle mounting, thermal protector Rotation reversed by electrical connection, 2-1/2" hub rings for base mounting included

US Motors

1971

Diameter: 5-5/8";HP: 1/4;Volts: 208-230;F/L Amps: 1.50;Phase: 1;Hz: 60;Service Factor: 1.00;RPM: 1075;Speeds: 3;Rot.: Rev.;Efficiency: 59%;Shaft Diam.: 1/2";Shaft Length: 5";Bearing Type: ...

S88-546

3-Speed Blower Motor 48 Frame Permanent Split Capacitor

For direct drive furnace blowers and other air over applications 24" line leads Four studs shaft end on 5-1/8" bolt circles Sleeve bearing for all angle mounting, thermal protector Rotation reversed by electrical connection, 2-1/2" hub rings for base mounting included

US Motors

1864

Diameter: 5-5/8";HP: 1/3;Volts: 115;F/L Amps: 5.00;Phase: 1;Hz: 60;Service Factor: 1.00;RPM: 1075;Speeds: 3;Rot.: Rev.;Efficiency: 58%;Shaft Diam.: 1/2";Shaft Length: 5";Bearing Type: SAB ...

S88-547

Blower Motor

48 frame; PSC, 3 speed 1075 RPM, all-angle mounting, SAB bearing type

US Motors

1972

Diameter: 5-5/8";HP: 1/3;Volts: 208-230;F/L Amps: 1.90;Phase: 1;Hz: 60;Service Factor: 1.00;RPM: 1075;Speeds: 3;Rot.: Rev.;Efficiency: 65%;Shaft Diam.: 1/2";Shaft Length: 5";Bearing Type: ...

S88-548

Blower Motor Permanent Split Capacitor

48 frame, 3-speed 1075 RPM SAB bearings, all-angle mounting

US Motors

1865

Diameter: 5-5/8";HP: 1/2;Volts: 115;F/L Amps: 6.50;Phase: 1;Hz: 60;Service Factor: 1.00;RPM: 1075;Speeds: 3;Rot.: Rev.;Efficiency: 65%;Shaft Diam.: 1/2";Shaft Length: 4";Bearing Type: SAB ...

S88-549

3-Speed Blower Motor

48 Frame, PSC, SAB Bearing, 1075 RPM, all angle mounting Four studs shaft end on 5-1/8" bolt circles Sleeve bearing for all angle mounting, thermal protector Rotation reversed by electrical connection, 2-1/2" hub rings for base mounting included

US Motors

1973

Diameter: 5-5/8";HP: 1/2;Volts: 208-230;F/L Amps: 2.90;Phase: 1;Hz: 60;Service Factor: 1.00;RPM: 1075;Speeds: 3;Rot.: Rev.;Efficiency: 69%;Shaft Diam.: 1/2";Shaft Length: 5";Bearing Type: ...

S88-560

3-Speed Blower Motor 48 Frame Permanent Split Capacitor

For direct drive furnace blowers and other air over applications Four studs shaft end on 5-1/8" bolt circles Sleeve bearing for all angle mounting, thermal protector Rotation reversed by electrical connection, 2-1/2" hub rings for base mounting included

US Motors

8904

Diameter: 5-5/8";HP: 3/4;Volts: 115;F/L Amps: 9.50;Phase: 1;Hz: 60;Service Factor: 1.00;RPM: 1075;Speeds: 3;Rot.: Rev.;Efficiency: 66%;Shaft Diam.: 1/2";Shaft Length: 4";Bearing Type: SAB ...

S89-093

RESCUE® Direct Drive Blower Motor Permanent Split Capacitor

48 frame, 1075 RPM Ball bearing, all-angle mounting Reversible rotation, 4 speed

US Motors

5460

Diameter: 5-5/8";HP: 1/2-1/6;Volts: 115;F/L Amps: 7.30;Phase: 1;Hz: 60;Service Factor: 1.00;RPM: 1075;Speeds: 4;Rot.: Rev.;Efficiency: 66%;Shaft Diam.: 1/2";Shaft Length: 5";Bearing Type: ...

S89-287

RESCUE® Direct Drive Blower Motor

48 frame, 1075 RPM Ball bearing, all-angle mounting Reversible rotation, 4 speed

US Motors

5470

Diameter: 5-5/8";HP: 3/4-1/5;Volts: 115;F/L Amps: 8.10;Phase: 1;Hz: 60;Service Factor: 1.00;RPM: 1075;Speeds: 4;Rot.: Rev.;Efficiency: 71%;Shaft Diam.: 1/2";Shaft Length: 5";Bearing Type: ...

L36-042

Universal Standing Pilot Burner

Pilot type: shell Lint-free, non-aerated Includes natural and LP gas inlet fittings Mounting brackets on all four sides Three tapped holes in each bracket

BASO Gas Products

J999MKA-2

Tip Style: A;

L36-272

Universal Standing Pilot Burner

Pilot type: "Y" Lint-free, non-aerated Includes natural and LP gas inlet fittings Mounting brackets on all four sides Three tapped holes in each bracket

BASO Gas Products

J999MYA-2

Tip Style: B;

L36-273

Universal Standing Pilot Burner

"L" pilot type Lint-free, non-aerated Includes natural and LP gas inlet fittings Mounting brackets on all four sides Three tapped holes in each bracket

BASO Gas Products

J999MHA-2

Tip Style: C;

L47-688

Thermocouple

Designed to simplify installation on automatic pilot controls and pilot burners Stainless steel head and weld at tip to provide reliable performance Kit includes adapters to fit most types of pilot burners Length: 18"

BASO Gas Products

K17AT-18H

Length: 18";

L47-689

Thermocouple

Designed to simplify installation on automatic pilot controls and pilot burners Stainless steel head and weld at tip to provide reliable performance Kit includes adapters to fit most types of pilot burners Length: 24"

BASO Gas Products

K17AT-24H

Length: 24";

L47-690

Thermocouple

Designed to simplify installation on automatic pilot controls and pilot burners Stainless steel head and weld at tip to provide reliable performance Kit includes adapters to fit most types of pilot burners Length: 30"

BASO Gas Products

K17AT-30H

Length: 30";

L47-691

Thermocouple

Designed to simplify installation on automatic pilot controls and pilot burners Stainless steel head and weld at tip to provide reliable performance Kit includes adapters to fit most types of pilot burners Length: 36"

BASO Gas Products

K17AT-36H

Length: 36";

L47-692

Thermocouple

Designed to simplify installation on automatic pilot controls and pilot burners Stainless steel head and weld at tip to provide reliable performance Kit includes adapters to fit most types of pilot burners Length: 48"

BASO Gas Products

K17AT-48H

Length: 48";

L47-694

Thermocouple

Designed to simplify installation on automatic pilot controls and pilot burners Stainless steel head and weld at tip to provide reliable performance Kit includes adapters to fit most types of pilot burners Length: 72"

BASO Gas Products

K17AT-72H

Length: 72";

L36-138

Replacement Limit Control

Direct replacement controls have quick connect terminals and adjustment slide to set 120°F to 250°F Contacts are rated to handle voltage from mV to 240VAC Rated 5.8A @ 120VAC, 2.9A @ 240VAC

Cam-Stat

L59-3B-A

Element Length: 3";Limit Temp.: 120°F to 250°F;

L36-139

Replacement Limit Control

Direct replacement controls have quick connect terminals and adjustment slide to set 120°F to 250°F Contacts are rated to handle voltage from mV to 240VAC Rated 5.8A @ 120VAC, 2.9A @ 240VAC

Cam-Stat

L59-7B-A

Element Length: 7";Limit Temp.: 120°F to 250°F;

L36-152

Combination Fan and Limit Control

Includes a "heat assist" time start Time delay turns on the blower as a function of time and/or temperature after the room thermostat calls for heat Turns off the blower as a function of temperature at the indicated dial setting of the fan Limit portion will keep the furnace at a safe operating temperature Limit adjustment dial provided to match the setting of the device being replaced

Cam-Stat

FAL3C-05TD-120A

Element Length: 3";Limit Temp.: 150°F to 250°F;Fan Off Temp.: 90°F to 120°F;Fan On Diff.: 25°F to 50°F;

L36-819

Combination Fan and Limit Control

Includes a "heat assist" time start Time delay turns on the blower as a function of time and/or temperature after the room thermostat calls for heat Turns off the blower as a function of temperature at the indicated dial setting of the fan Limit portion will keep the furnace at a safe operating temperature Limit adjustment dial provided to match the setting of the device being replaced

Cam-Stat

FAL7C-05TD-120A

Element Length: 7";Limit Temp.: 150°F to 250°F;Fan Off Temp.: 90°F to 120°F;Fan On Diff.: 25°F to 50°F;

L37-342

Combination Fan and Limit Controls with Start Delay

Includes a "heat assist" time start Time delay turns on the blower as a function of time and/or temperature after the room thermostat calls for heat Turns off the blower as a function of temperature at the indicated dial setting of the fan Limit portion will keep the furnace at a safe operating temperature Limit adjustment dial provided to match the setting of the device being replaced

Cam-Stat

FALTS57C-05T-120A

Element Length: 7";Limit Temp.: 150°F to 250°F;Fan Off Temp.: 90°F to 120°F;Fan On Diff.: 50°F;

L36-074

Replacement Generator for Millivolt Applications

Provides power for 750 millivolt self-generation control systems

Johnstone Supply

G01A-506

Output: 750mV;Length: 36";Replaces: White-Rodgers: G01A-506; Robertshaw: 1950-001;Features: Includes Adapter Sleeve for PG-9 Pilots;

L36-468

Replacement Generator for Millivolt Applications

Provides power for 750 millivolt self-generation control systems

Johnstone Supply

GO4A-502

Output: 750mV;Length: 36";Replaces: White-Rodgers: G04A-502; Honeywell: Q313A1139; Robertshaw: 1950-001;Features: No Need for a Sleeve or Other Adapting Hardware;

L36-911

Premium Thermocouple

30 mV 11/32 32 male connector nut and push-in clip connection 24" leads

Resideo

Q340A1074

Length: 24";

L36-912

Premium Thermocouple

30 mV 11/32 32 male connector nut connection 36" leads

Resideo

Q340A1090

Length: 36";

L37-020

Premium Thermocouple

Push-in clip, split nut, and adapter assembly for easy pilot burner installation Male nut connector for Pilotstat® safety control power units Available in a variety of lead lengths

Resideo

Q340A1066

Length: 18";

L37-021

Premium Thermocouple

30 mV 11/32 32 male connector nut connection 30 in. leads Push-in clip, split nut, and adapter assembly for easy pilot burner installation

Resideo

Q340A1082

Length: 30";

L37-022

Premium Thermocouple

Push-in clip, split nut, and adapter assembly for easy pilot burner installation Male nut connector for Pilotstat® safety control power units Available in a variety of lead lengths

Resideo

Q340A1108

Length: 48";

L37-432

Dual Standing Pilot Gas Valve

24VAC Inlet/outlet: 1/2 in. x 1/2 in. Standard opening 3.5 in. W.C. pressure regulator setting

Resideo

VR8200A2132

Volts: 24VAC;BtuH Capacity: 130,000;Opening Style: Standard;Inlet Conn.: 1/2";Outlet Conn.: 1/2";Side Tap: No;

L37-808

Universal Intermittent Pilot Ignition Control

Replaces over 400 Honeywell Home and competitive models For use in single rod or dual rod applications Includes relay contacts for use with any intermittent pilot gas control string with max 1.0A pilot or 2.0A main valve rating LED flame strength indicator and a diagnostic LED that helps direct service efforts

Resideo

S8610U3009

Description: Control Module;

L37-927

Electronic Ignition Gas Valve

Wide-capacity control for almost any IP, HSI or DSI gas-fired appliances Use with 24VAC, 50/60 Hz, heating appliances, using natural, manufactured or LP gas Dual-redundant gas valve design

Resideo

VR8345M4302

Volts: 24VAC;BtuH Capacity: 300,000;Opening Style: Standard;Inlet Conn.: 3/4";Outlet Conn.: 3/4";

L38-263

Universal Intermittent Pilot Retrofit System

Y-pack contains S8610U3009 and VR8204A2142, 1/2 in. by 1/2 in. inlet/outlet, flange kit, LP conversion kit Electronic control of intermittent pilot ignition systems used on gas fired furnaces, boilers and other heating appliances

Resideo

Y8610U4001

Gas Type: Natural/LP;BtuH Capacity: 150,000;Inlet Conn.: 1/2";Outlet Conn.: 1/2";

L38-357

Ignitor Burner

For natural gas with a BCR-18 orifice Front single tip style "B" mounting bracket Non-primary aeration

Resideo

Q345A1305

Tip Style: A;

L38-358

Ignitor Burner

For use w/natural gas only Compatible with all Honeywell Home intermittent ignition control modules 15,000V open circuit spark ignition

Resideo

Q345A1313

Tip Style: B;

L38-359

Ignitor Burner

Includes pilot burner with bracket, ceramic-insulated Kanthal flame rod/spark ignitor and ground strap Single tip style

Resideo

Q345A1321

Tip Style: C;

L38-632

Ignitor Flame Rod Assembly

30" lead and ignition wire length Size: 1/2" inlet x 1/2" outlet Used with SV9500, SV9600 Field replacement for Q3450, Q3480 hot surface pilot burner

Resideo

Q3400A1024

Application: Ignitor Flame Rod Assembly;

L38-718

SmartValve® System Control

Offers full range of opening characteristics: slow, normal, and fast Universal kits include natural to LP conversion and 3/4" to 1/2" bushings

Resideo

SV9501M2528

Application: Intermittent HSI Pilot;Opening Style: Standard;Temp. Range: -40°F to +175°F;Includes: LP Conversion Kit;

L43-886

Universal Integrated Furnace Control

Replaces over 195 furnace controls Complete set of wiring harnesses for universal compatibility, simplified installation and field-adjustable timings LED indicators provide system status, performance and diagnostic information

Resideo

S9200U1000

Replaces over 195 furnace controls
Complete set of wiring harnesses for universal compatibility, simplified installation and field-adjustable timings
LED indicators provide system status, performance and diagnostic information0

L44-673

Universal Electronic Fan Timer

Replaces 44 existing Honeywell Home controls series (ST9120, ST9101, ST9141, and ST9160) Includes replaceable fuse and DIP switch with selectable heat and cool delay Integrates control of all combustion blower and circulating fan operations in a gas warm-air appliance Includes a replaceable fuse and DIP switch with selectable heat and cool delay for added flexibility

Resideo

ST9120U1011

Replaces 44 existing Honeywell Home controls series (ST9120, ST9101, ST9141, and ST9160)
Includes replaceable fuse and DIP switch with selectable heat and cool delay
Integrates control of all combustion blower and circulating fan operations in a gas warm-air appliance
Includes a replaceable fuse and DIP switch with selectable heat and cool delay for added flexibility0

L44-844

Glowfly® Universal Hot Surface Ignitor

6 Pack Optimized to replace over 110 ignitor applications Next-generation OEM silicon nitride quality for any installation Universal bracket design for improved lighter placement 120 VAC Igniter length 1.36"

Resideo

Q3200U2002 6PK

Lead Length: 15";

L44-845

Glowfly® Universal Hot Surface Ignitor

Single kit Replaces over 110 ignitor models Next-generation OEM silicon nitride quality for any installation Custom designed bracketing for universal installation 120 VAC Igniter length 1.36"

Resideo

Q3200U1004

Lead Length: 15";

L48-287

Universal Hot Surface Ignition Module

Field selectable dip switches Expands cross reference to over 800 controls Warm up time enhancement- Four most popular timings Trial for ignition Pre-purge Simplified LED Diagnostics- Tri-color LED, simpler codes Micrometer ports for reading flame current - Test quality of igniter

Resideo

S8910U3000

Description: Universal Hot Surface Ignition Module;

L86-050

Fan and Limit Controller

11-1/2 in. insertion 125°F fan on and 100°F fan off stops 200°F high limit stop Forced warm air heating systems

Resideo

L4064B2210

Element Length: 11-1/2";Min. Switch Temp.: -40°F;Max. Switch Temp.: 190°F;Fan On Temp.: 65°F to 215°F;Mounting: Surface;

L86-051

Fan and Limit Controller

5 in. insertion 125°F fan on and 100°F fan off stops 200°F high limit stop Forced warm air heating systems

Resideo

L4064B2228

Element Length: 5";Min. Switch Temp.: -40°F;Max. Switch Temp.: 190°F;Fan On Temp.: 65°F to 215°F;Mounting: Surface;

L86-052

Fan and Limit Controller

3 wiring terminal options available for easy installation Push-in receptacles for stripped wire Female receptacles for 1/4 in. male flag connectors

Resideo

L4064B2236

Element Length: 8";Min. Switch Temp.: -40°F;Max. Switch Temp.: 190°F;Fan On Temp.: 65°F to 215°F;Mounting: Surface;

L86-058

Universal Intermittent Pilot Retrofit System

Converts conventional standing pilot system to intermittent pilot system For use with 24 VAC gas-fired atmospheric furnaces, boiler and heating appliances Y-pack containing S8610U3009 and VR8304M with 1/2 in. by 3/4 in. inlet/outlet, flange kit, LP conversion kit

Resideo

Y8610U6006

Gas Type: Natural/LP;BtuH Capacity: 270,000;Inlet Conn.: 1/2";Outlet Conn.: 3/4";

L36-403

700 Series 24V Combination Gas Valve

1/2" X 3/4" combo gas valve 12 VDC 0.18 Amps 24 VAC 0.2 Amps 50/60 Hz 240,000 Btu

Robertshaw

700-400

Volts: 24 VAC;BtuH Capacity: 240,000;Inlet Conn.: 1/2";Outlet Conn.: 3/4";Bushings: One 3/4" x 1/2";Side Tap: No;

L37-540

720 Series Dual Valve Control

1/2" X 3/4" combo gas valve 150,000 Btu 24 VAC, .5 Amps, 50/60 Hz Wide range of applications

Robertshaw

720-400

BtuH Capacity: 150,000;Inlet Conn.: 1/2";Outlet Conn.: 3/4";Bushings: One 3/4" x 1/2" , One 1/2" x 3/8", One 3/4" x 3/8";Side Tap: No;

L38-127

Automatic Pilot Re-Light Kit

Combination 24VAC or 120VAC module All hardware included to replace similar type modules 24/117VAC, 0.1A

Robertshaw

785-001

Combination 24VAC or 120VAC module
All hardware included to replace similar type modules
24/117VAC, 0.1A0

L38-693

Hot Surface Ignitor

10" lead length 120 VAC Designed to reach ignition temperature within 17 seconds 18-gauge nickel chrome lead wires Includes mounting adapter

Supco

SIG101

Lead Length: 10";

L38-694

Hot Surface Ignitor

6" lead length 120 VAC Designed to reach ignition temperature within 17 seconds 18-gauge nickel chrome lead wires Includes mounting adapter

Supco

SIG102

Lead Length: 6";

L36-075

Replacement Generator for Millivolt Applications

Replaces White-Rodgers G01A-505, Honeywell Q313A1188, and Robertshaw 1950-532 Features Mounting Nut and Spring Clip 750mV output 36" length Provides power for 750 millivolt self-generation control systems

White-Rodgers

G01A-505

Output: 750mV;Length: 36";Replaces: White-Rodgers: G01A-505; Honeywell: Q313A1188; Robertshaw: 1950-532;Features: Mounting Nut & Spring Clip;

L36-983

Standing Pilot Gas Valve

Natural or LP Regulator setting: 3.5" LP conversion kit included Flow direction: str.thru Ideal for general purpose replacement for pilot ignition systems

White-Rodgers

36C03-333

Volts: 24VAC;BtuH Capacity: 230,000;Opening Style: Fast;Inlet Conn.: 1/2";Outlet Conn.: 3/4";Side Tap: Yes;

L37-502

Standing Pilot Gas Valve

Natural or LP Regulator setting: 3.5" LP conversion kit included Flow direction: str.thru Ideal for general purpose replacement for pilot ignition systems

White-Rodgers

36C03-300

Volts: 24VAC;BtuH Capacity: 230,000;Opening Style: Fast;Inlet Conn.: 1/2";Outlet Conn.: 3/4";Side Tap: No;

L37-698

Silicon Carbide Hot Surface Ignitor

5.5" Lead length Molex internally keyed connector with .093" male pins Lead insulation temp. rating: 200?C Works with 15, 17 or 45 second hot surface ignition systems

White-Rodgers

767A-369

Lead Length: 5-1/2";

L37-699

Silicon Carbide Hot Surface Ignitor

19.125" Lead length Stripped ends Lead insulation temp. rating: 200?C Works with 15, 17 or 45 second hot surface ignition systems

White-Rodgers

767A-371

Lead Length: 19-1/8";

L37-812

Silicon Carbide Hot Surface Ignitor

5.25" Lead length Receptacle with .093" male pins Lead insulation temp. rating: 200?C Works with 15, 17 or 45 second hot surface ignition systems

White-Rodgers

767A-361

Lead Length: 5-1/4";

L37-813

Silicon Carbide Hot Surface Ignitor

11" Lead length Stripped ends Lead insulation temp. rating: 200?C Works with 15, 17 or 45 second hot surface ignition systems

White-Rodgers

767A-374

Lead Length: 11";

L37-814

Silicon Carbide Hot Surface Ignitor

4.5" Lead length Molex front lock connector with 0.92" male pins Lead insulation temp. rating: 200?C Works with 15, 17 or 45 second hot surface ignition systems

White-Rodgers

767A-376

Lead Length: 4-1/2";

L37-815

Silicon Carbide Hot Surface Ignitor

5.25" Lead length Molex side lock connector with .092" male pins Lead insulation temp. rating: 200?C Works with 15, 17 or 45 second hot surface ignition systems

White-Rodgers

767A-372

Lead Length: 5-1/4";

L37-816

Silicon Carbide Hot Surface Ignitor

5.25" Lead length Receptacle with .093" male pins Lead insulation temp. rating: 200°C Works with 15, 17 or 45 second hot surface ignition systems

White-Rodgers

767A-370

Lead Length: 5-1/4";

L39-565

Universal Non-Integrated HSI Ignition Module

Program keys for multiple timing selections Tri-colored LED indicator for diagnostics Direct and indirect flame sense compatible Universal design for maximum versatility

White-Rodgers

50E47-843

Description: Carbide Non-Integrated HSI Furnace Control;

L39-566

Universal Silicon Carbide Integrated Furnace Control

Use in natural and LP Gas applications Ignition trial time: 4 seconds; prepurge time: 30 seconds; retries: 2 times Replaces White-Rodgers 50A50/50A55's and OEM replacement hot surface ignition modules for Trane, ICP, Amana and York

White-Rodgers

50A55-843

Description: Universal Silicon Carbide Integrated Ignition Control;Ignition Trial Time: 4 Seconds;Retries: 2 Times;Prepurge Period: 30 Seconds;

L37-206

Pump Coupler

Cast Iron For use on PD-35, PD-37, 60AA and 1522

Bell & Gossett

118723

Description: Coupler Assembly;

L37-207

Pump Coupler

Cast Iron For use on PD-35, PD-37, 60AA and 1522

Bell & Gossett

118473

Description: Coupler Assembly;

L37-350

Pump Coupler

Cast iron For use on Series 100, HV, PR, 1", 1-1/4", 1-1/2" and 2"

Bell & Gossett

118705

Description: Coupler Assembly;

L80-966

Replacement Parts and Accessories

Bearing assembly includes seal and gasket

Bell & Gossett

118844LF

Description: Bearing Assembly for Iron Pumps;Application: Series 100 IB, BI, NFI;

L86-074

Booster Pump

Oil lubrication system 1/12 HP, iron body Sleeve-type, extra-long bearings Centrifugal impeller design Does not include flanges

Bell & Gossett

106189

Body Type: Iron;Volts: 115;Phase: 1;RPM: 1725;HP: 1/12;Conn.: NPTF;Flange Size: 3/4" 1", 1-1/4", 1-1/2";Wt. Lbs.: 19;GPM @ 0': 38;GPM @ 4': 25;GPM @ 8': 5;

L81-110

AquaPump (Small)

3 speed 15 GPM/57 LPM Closed-loop hydronic heating and cooling circulating pump Twist-To-Fit universal flange rotates 90° to fit every application Hardened ceramic internal shaft and bearings for long-lasting, dependable performance Reduced operational noise and vibrations help extend the life of the pump and eliminate callbacks Flow check is sold as a standalone part so there is no need to stock a separate pump assembly

Resideo

PC3F1558IUF00

Body Type: Cast Iron;HP: 1/25;Flange to Flange: 6.5";GPM @ 1': 15;

L86-128

00 Series Cartridge Circulator Pump

Designed for hydronic heating and chilled water systems Compact, lightweight, self-lubricating, direct drive design Wet rotor circulator Operates in systems up to 125 PSI and 230°F Iron pumps for closed systems, bronze/stainless steel for open systems 3250 RPM N/A in chart indicates not to operate pumps at these low head levels L86-212 through L86-215 include flanges L87-211 and L87-214 have a removable integral flow check that eliminates the need for a separate in-line flow check L87-212 has a built-in transformer, relay and priority switch for easy installation of an additional zone or indirect hot water heater

Taco

007-F5

Body Type: Cast Iron;Volts: 115;Phase: 1;RPM: 3250;HP: 1/25;Conn.: Flanged;Flange Size: 3/4", 1", 1-1/4", 1-1/2";Flange to Flange: 6-3/8";Wt. Lbs.: 8;GPM @ 1': N/A;GPM @ 3': 20;GPM @ 5': 17 ...

L87-210

00 Series Cartridge Circulator Pump

Designed for hydronic heating and chilled water systems Compact, lightweight, self-lubricating, direct drive design Wet rotor circulator Operates in systems up to 125 PSI and 230°F Iron pumps for closed systems, bronze/stainless steel for open systems 3250 RPM N/A in chart indicates not to operate pumps at these low head levels L86-212 through L86-215 include flanges L87-211 and L87-214 have a removable integral flow check that eliminates the need for a separate in-line flow check L87-212 has a built-in transformer, relay and priority switch for easy installation of an additional zone or indirect hot water heater

Taco

007-SF5

Body Type: Stainless Steel;Volts: 115;Phase: 1;RPM: 3250;HP: 1/25;Conn.: Flanged;Flange Size: 3/4", 1", 1-1/4", 1-1/2";Flange to Flange: 6-3/8";Wt. Lbs.: 9;GPM @ 1': N/A;GPM @ 3': 20;GPM @...

L51-232

ecobee Smart Thermostat Premium

Includes a remote SmartSensor Built-in indoor monitor air quality and radar occupancy sensors Integrates with other connected devices Supports 1-wire or 2-wire accessory control 5-year warranty with professional installation

ecobee

EB-STATE6P-01

System Application: Conventional, Gas, Oil, Electric, DualFuel, Forced Air HVAC systems;Stages Heat/Cool: Conventional -(2H/2C) Heat Pumps -(4H/2C) 2 stage heat pump + 2 stage AUX / 2 stage cool;Pow ...

L51-923

ecobee Smart Thermostat Lite Pro

Wi-Fi enabled Remote management Built-in humidity sensor 4" full-color touch screen 5-year warranty with professional installation 1-wire accessory support Integrates with the most popular smart home systems

ecobee

EB-STATE7P-01

System Application: Conventional, Gas, Oil, Electric, DualFuel, Forced Air HVAC systems;Stages Heat/Cool: Conventional -(2H/2C) Heat Pumps -(4H/2C) 2 stage heat pump + 2 stage AUX / 2 stage cool;Pow ...

L51-906

Google Nest Learning Thermostat (4th gen) - PRO, Polished Silver

New design with a larger, customizable display Compatible with complex HVAC systems up to 4H 2C including heat pumps and IAQ products Larger display and redesigned Nest Temperature Sensor in the box Easy installation in the Google Home app with no need to use the customer's phone Enter Pro ID once and it automatically prepopulates on future installs 5-year extended warranty

Google Nest

GA05560-US

System Application: Gas, Electric, Forced Air, Heat Pump, Radiant, Oil, Hot Water, Solar and Geothermal;Stages Heat/Cool: Up to 3/2;Power Method: 24V Hardwired and Rechargeable Lithium Battery;Term ...

L44-536

Wireless FocusPro® 6000 Kit

Same great features of the FocusPRO® thermostat - now wireless Installs in minutes Displays outdoor temperature and humidity 1-year battery life 2 month low battery warning Dual Fuel enabled Equipment Interface Module: All HVAC equipment is wired to the module Module receives communication from the wireless devices Return Air Sensor: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat Maintains 62 F for heating and 82 F for cooling Powered by RedLINK™ reliability No interference with other wireless devices in the home

Honeywell Home

YTH6320R1001

System Application: Gas, Oil, Electric, Heat Pump, Forced Warm Air, Hot Water, Steam or Gravity;Stages Heat/Cool: Up to 3/2 Heat Pump or Up to 2/2 Conventional;Power Method: Battery;Terminal Design ...

L44-537

Wireless FocusPro® 5000 Kit

Same great features of the FocusPRO® thermostat - now wireless. Installs in minutes Displays outdoor temperature and humidity 1 year battery life 2 month low battery warning Dual Fuel enabled Equipment Interface Module: All HVAC equipment is wired to the module Module receives communication from the wireless devices Return Air Sensor: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat Maintains 62 F for heating and 82 F for cooling Powered by RedLINK™ reliability No interference with other wireless devices in the home

Honeywell Home

YTH5320R1000

System Application: Gas, Oil, Electric, Heat Pump, Forced Warm Air, Hot Water, Steam or Gravity;Stages Heat/Cool: Up to 3/2 Heat Pump or Up to 2/2 Conventional;Power Method: Battery;Terminal Design ...

L44-541

Equipment Interface Module for RedLINK™ Wireless FocusPRO®

Powered by RedLINK™ reliability No interference with other wireless devices in the home Works with TH6320R1004 or TH5320R1002 Wireless FocusPRO® thermostats Input for Return Air Sensor Quick-connect terminal blocks LEDs for power and system status

Honeywell Home

THM5320R1000

Description: Equipment Interface Module (Wireless FocusPRO);Connected: Yes;

L46-667

RedLINK Enabled VisionPRO® 8000 Thermostat

Works in Residential and Light Commercial applications Compatible with RedLINK accessories Universal install (standard battery or hardwired; 2-wire or wireless with Equipment Interface Module) MicroSD port for quick install Plain language setup On screen dealer information and Smart Schedule

Honeywell Home

TH8110R1008

System Application: Gas, Oil, Electric, Heat Pump, Forced Warm Air, Hot Water, Steam or Gravity;Stages Heat/Cool: 1/1 Heat Pump or Up to 1 /1 Conventional When Used Standalone; Up to 4/2 Heat Pump or ...

L46-668

RedLINK Enabled VisionPRO® 8000 Thermostat

Works in Residential and Light Commercial applications Compatible with RedLINK accessories Universal install (standard battery or hardwired; 2-wire or wireless with Equipment Interface Module) MicroSD port for quick install Plain language setup On screen dealer information and Smart Schedule

Honeywell Home

TH8320R1003/U

System Application: Gas, Oil, Electric, Heat Pump, Forced Warm Air, Hot Water, Steam or Gravity;Stages Heat/Cool: 3/2 Heat Pump or Up to 2/2 Conventional When Used Standalone; Up to 4/2 Heat Pump or...

L46-669

RedLINK Enabled VisionPRO® 8000 Thermostat

Works in Residential and Light Commercial applications Compatible with RedLINK accessories Universal install (standard battery or hardwired; 2-wire or wireless with Equipment Interface Module) MicroSD port for quick install Plain language setup On screen dealer information and Smart Schedule

Honeywell Home

TH8321R1001/U

System Application: Gas, Oil, Electric, Heat Pump, Forced Warm Air, Hot Water, Steam or Gravity;Stages Heat/Cool: Up to 3/2 Heat Pump or Up to 2/2 Conventional When Used Standalone; Up to 4/2 Heat Pu ...

L46-671

IAQ Thermostat Prestige® IAQ Kit with RedLink® and EIM

7-day programmable color touchscreen provides control of temperature, humidification, dehumidification and ventilation Works in residential and light commercial applications Self-monitoring diagnostics, intuitive install, alerts & system performance logs White front, White sides Four universal inputs on the Equipment Interface Module

Honeywell Home

YTHX9421R5085WW

System Application: Gas, Oil, Electric, Heat Pump, Forced Warm Air, Hot Water, Steam or Gravity;Stages Heat/Cool: Up to 4/2 Heat Pump or up to 3/2 Conventional;Power Method: Hardwired;Terminal Desi ...

L49-155

T6 Pro Smart Thermostat

Remote access to the thermostat through Smartphone, tablet or computer 7 day programmable or non-programmable Up to 3 Heat / 2 Cool heat pump and 2 Heat / 2 Cool conventional Large, clear backlit digital display

Honeywell Home

TH6320WF2003

System Application: Dual Fuel, 24VAC systems; Gas, Oil, Electric Warm Air; Hot water Coil; Gas, Oil, Electric Hydronic; or Steam / Gravity Systems;Stages Heat/Cool: Up to 3/2 Heat Pump and 2/2 Conven ...

L49-156

T6 Pro Smart Thermostat

Wi-Fi capable Geofencing technology 7 day programmable or non-programmable Up to 2 Heat / 1 Cool heat pump and 2 Heat / 2 Cool conventional Remote access to the thermostat through Smartphone, tablet or computer Large, clear backlit digital display

Honeywell Home

TH6220WF2006

System Application: 24VAC systems; Gas, Oil, Electric Warm Air; Hot water Coil; Gas, Oil, Electric Hydronic; or Steam / Gravity Systems;Stages Heat/Cool: Up to 2/1 Heat Pump or 2/2 Conventional;Powe ...

L49-157

T6 Pro Programmable Thermostat

7 day programmable or non-programmable Up to 2 Heat / 1 Cool heat pump and 2 Heat / 2 Cool conventional Large, clear backlit digital display

Honeywell Home

TH6220U2000

System Application: Standard Efficient Gas Forced Air, High Efficacy Gas Forced Air, Oil Forced Air, Electric Forced Air, Hot water Fan Coil, Geothermal Heat Pump, Air to Air Heat Pump, Hot Water Radi ...

L49-158

T6 Pro Programmable Thermostat

7 day programmable or non-programmable Up to 2 Heat / 1 Cool heat pump and 1 Heat / 1 Cool conventional Battery or hardwired Large, clear backlit digital display

Honeywell Home

TH6210U2001

System Application: Standard Efficient Gas Forced Air, High Efficacy Gas Forced Air, Oil Forced Air, Electric Forced Air, Hot water Fan Coil, Geothermal Heat Pump, Air to Air Heat;Stages Heat/Cool: U ...

L51-911

FocusPRO® Programmable Thermostat

Non-Connected thermostat Programmable Hard-wired or battery powered 1H/1C UWP® Wall Plate Large, bright digital display Filter Change Reminder 5-year warranty

Honeywell Home

TH2110U4004/U

System Application: 24 Vac Systems, 750 mv, Gas, Oil, Electric, Radient Hot Water, and Steam; Stages Heat/Cool: 1H/1C; Power Method: Hardwired or Battery; Terminal Designations: R, Rc, C, W, Y, G, O/B, K, L/A; Color: White; Volts: 24VAC; System Switching: Auto, Manual; Dimensions L x W x H: 4.75 x 2.31 x 6.25; Wt. Lbs.: 0.71; Connected: No;

L51-913

FocusPRO® Smart Thermostat

Connected thermostat Programmable 1H/1C UWP® Wall Plate Filter Change Reminder 5-year warranty Large digital display

Honeywell Home

TH2110WF4008/U

System Application: 24 Vac Systems; Gas, Oil, Electric, Radient Hot Water, and Steam;Stages Heat/Cool: 1H/1C;Power Method: Hardwired;Terminal Designations: R, Rc, C, W, Y, G, O/B, K, L/A;Color: Wh ...

L45-101

Non-Programmable Thermostat

1 heat/ 1 cool Compatible with conventional systems 2 sq. in. display 4.7"W x 4.4"H x 1.1"D Battery or 24V power

Pro1 IAQ

T701

System Application: Gas/Electric or Oil/Heat Pump;Stages Heat/Cool: 1/1;Power Method: Hardwired or Battery;Terminal Designations: Rh, Rc, C, Y, W, G, B, O;Description: 4" Blue Display;

L45-102

Programmable Thermostat

1 heat / 1 cool Compatible with conventional systems 4 sq.in. display 5-1-1 day programmable 4.7"W x 4.4"H x 1.1"D Battery or 24V power

Pro1 IAQ

T705

System Application: Gas/Electric or Oil/Heat Pump;Stages Heat/Cool: 1/1;Power Method: Hardwired or Battery;Terminal Designations: Rh, Rc, C, Y, W, G, B, O;Description: 4 sq. inch display;

L45-103

Programmable Thermostat

2 heat / 2 cool Compatible with conventional systems 4 sq.in. display 5-1-1 day programmable 4.7"W x 4.4"H x 1.1"D Battery or 24V power

Pro1 IAQ

T715

System Application: Gas/Electric or Oil;Stages Heat/Cool: 2/2;Power Method: Hardwired or Battery;Terminal Designations: R, C, Y, Y2, W, W2, G;Description: 4 sq. inch display;

L45-106

Non-Programmable Thermostat

Single stage - 1 heat only or 1 cool only Compatible with conventional systems 4 sq.in. display 4.7"W x 4.4"H x 1.1"D Battery or 24V power

Pro1 IAQ

T771

System Application: Gas/Electric or Oil;Stages Heat/Cool: 1/0 or 0/1;Power Method: Hardwired or Battery;Terminal Designations: R, C, W/Y, G;Description: 4" Blue Display;